利用rman创建standby(二)
作者: NinGoo(http://ningoo.itpub.net)发表于: 2006.11.21 16:51
分类: Oracle
出处: http://ningoo.itpub.net/post/2149/230978
---------------------------------------------------------------
在利用rman创建standby(一)中，通过试验演示了如何利用rman的热备，然后通过restore来创建备库。实际上，rman提供了更便捷的方式来创建standby，方法就是通过duplicate命令。
第1步到第6步和前一个试验一致，这里不再重复。
7.利用rman备份主库
注意同时备库控制文件
C:>rman target /
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: NING (DBID=1192138470)
RMAN> backup full format='d:backup.ora' database include current controlfile for standby;
Starting backup at 21-NOV-06
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=17 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current SPFILE in backupset
including standby controlfile in backupset
input datafile fno=00001 name=D:ORACLEORADATANINGSYSTEM01.DBF
input datafile fno=00002 name=D:ORACLEORADATANINGUNDOTBS01.DBF
input datafile fno=00004 name=D:ORACLEORADATANINGEXAMPLE01.DBF
input datafile fno=00005 name=D:ORACLEORADATANINGINDX01.DBF
input datafile fno=00007 name=D:ORACLEORADATANINGUSERS01.DBF
input datafile fno=00003 name=D:ORACLEORADATANINGCWMLITE01.DBF
input datafile fno=00006 name=D:ORACLEORADATANINGTOOLS01.DBF
input datafile fno=00008 name=D:ORACLEORADATANINGTEST01.DBF
channel ORA_DISK_1: starting piece 1 at 21-NOV-06
channel ORA_DISK_1: finished piece 1 at 21-NOV-06
piece handle=D:BACKUP.ORA comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:17
Finished backup at 21-NOV-06
8.归档主库当前日志
SQL> alter system archive log current;
System altered.
9.启动备库到nomount
SQL> conn /@test as sysdba
Connected to an idle instance.
SQL> startup nomount pfile='d:/oracle/ora92/database/inittest.ora'
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
10.利用rman恢复备库C:>rman target / auxiliary /@test
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: NING (DBID=1192138470)
connected to auxiliary database: ning (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 21-NOV-06
using target database controlfile instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=13 devtype=DISK
printing stored script: Memory Script
{
restore clone standby controlfile to clone_cf;
replicate clone controlfile from clone_cf;
sql clone 'alter database mount standby database';
}
executing script: Memory Script
Starting restore at 21-NOV-06
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring controlfile
output filename=D:ORACLEORADATATESTCONTROLSTANDBY.CTL
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=D:BACKUP.ORA tag=TAG20061121T163118 params=NULL
channel ORA_AUX_DISK_1: restore complete
Finished restore at 21-NOV-06
replicating controlfile
input filename=D:ORACLEORADATATESTCONTROLSTANDBY.CTL
sql statement: alter database mount standby database
printing stored script: Memory Script
{
set until scn 710788;
set newname for datafile 1 to
"D:ORACLEORADATATESTSYSTEM01.DBF";
set newname for datafile 2 to
"D:ORACLEORADATATESTUNDOTBS01.DBF";
set newname for datafile 3 to
"D:ORACLEORADATATESTCWMLITE01.DBF";
set newname for datafile 4 to
"D:ORACLEORADATATESTEXAMPLE01.DBF";
set newname for datafile 5 to
"D:ORACLEORADATATESTINDX01.DBF";
set newname for datafile 6 to
"D:ORACLEORADATATESTTOOLS01.DBF";
set newname for datafile 7 to
"D:ORACLEORADATATESTUSERS01.DBF";
set newname for datafile 8 to
"D:ORACLEORADATATESTTEST01.DBF";
restore
check readonly
clone database
;
}
executing script: Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 21-NOV-06
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:ORACLEORADATATESTSYSTEM01.DBF
restoring datafile 00002 to D:ORACLEORADATATESTUNDOTBS01.DBF
restoring datafile 00003 to D:ORACLEORADATATESTCWMLITE01.DBF
restoring datafile 00004 to D:ORACLEORADATATESTEXAMPLE01.DBF
restoring datafile 00005 to D:ORACLEORADATATESTINDX01.DBF
restoring datafile 00006 to D:ORACLEORADATATESTTOOLS01.DBF
restoring datafile 00007 to D:ORACLEORADATATESTUSERS01.DBF
restoring datafile 00008 to D:ORACLEORADATATESTTEST01.DBF
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=D:BACKUP.ORA tag=TAG20061121T163118 params=NULL
channel ORA_AUX_DISK_1: restore complete
Finished restore at 21-NOV-06
printing stored script: Memory Script
{
switch clone datafile all;
}
executing script: Memory Script
datafile 2 switched to datafile copy
input datafilecopy recid=9 stamp=607106726 filename=D:ORACLEORADATATESTUNDOT
BS01.DBF
datafile 3 switched to datafile copy
input datafilecopy recid=10 stamp=607106726 filename=D:ORACLEORADATATESTCWML
ITE01.DBF
datafile 4 switched to datafile copy
input datafilecopy recid=11 stamp=607106726 filename=D:ORACLEORADATATESTEXAM
PLE01.DBF
datafile 5 switched to datafile copy
input datafilecopy recid=12 stamp=607106726 filename=D:ORACLEORADATATESTINDX
01.DBF
datafile 6 switched to datafile copy
input datafilecopy recid=13 stamp=607106726 filename=D:ORACLEORADATATESTTOOL
S01.DBF
datafile 7 switched to datafile copy
input datafilecopy recid=14 stamp=607106726 filename=D:ORACLEORADATATESTUSER
S01.DBF
datafile 8 switched to datafile copy
input datafilecopy recid=15 stamp=607106726 filename=D:ORACLEORADATATESTTEST
01.DBF
Finished Duplicate Db at 21-NOV-06
如果第8步没有归档当前日志，duplicate时可能出现错误：
RMAN-05507: standby controlfile checkpoint (710256) is more recent than duplicat
ion point in time (709530)
至此，备库创建成功，后续步骤可以参照前一个试验。
可以看到，使用rman的duplicate来创建备库，过程简洁了不少，无需在手动创建备库控制文件。
(需要引用, 请注明出处: http://ningoo.itpub.net)
re: 利用rman创建standby(二) 
